Tag: 2879-20-1

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.2879-20-1,1-(2,3-Dihydrobenzo[b][1,4]dioxin-6-yl)ethanone,as a common compound, the synthetic route is as follows.

General procedure: To 1-(2,3-dihydrobenzo[b][1,4]dioxin-6-yl)ethan-1-one(A) (1 mmol) alcohol solution (5 mL) was added substituted benzaldehyde(1 mmol). After dissolution, 50% NaOH (0.5 mL) was added. After confirming the completion of the reaction by thin layer chromatography, the sediment was filtered, washed with ethanol and dried to obtain chalcone

The synthetic route of 2879-20-1 has been constantly updated, and we look forward to future research findings.

Reference£º
Article; Yang, Yu-Shun; Yang, Bing; Zou, Yan; Li, Guigen; Zhu, Hai-Liang; Bioorganic and Medicinal Chemistry; vol. 24; 13; (2016); p. 3052 – 3061;,
Benzodioxan
1,4-Benzodioxane | C8H8O2 – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.2879-20-1,1-(2,3-Dihydrobenzo[b][1,4]dioxin-6-yl)ethanone,as a common compound, the synthetic route is as follows.

General procedure: A series of sixteen novel 1, 4-benzodioxane-based thiosemicarbazones(3a-p) was synthesized by reacting appropriatethiosemicarbazide (1a-p) (5 mmol) and 1, 4-benzodioxan-6-ylmethyl ketone (2) (5 mmol) in methanol (15 mL) using glacialacetic acid (1e2 drops) as catalyst. Reflux at 80 C for 6 h wascarried out and the product formation and the reaction completion were examined by thin layer chromatography. Upon completion,the reaction mixturewas allowed to cool at r.t and the solid productwas collected by suction filtration followed by washing with hotmethanol and then dried in vacuum. Finally, the target thiosemicarbazonesderivatives were recrystallized from chloroformmethanolmixture (1:1) in good to excellent yields. The X-raymeasurements were read by mounting a 3m single crystal on agreased MiTe Gen loop and was inspected through thediffractometer (Bruker D8 Venture APEX diffractometer) at 296 (2)K by means of graphite-monochromated MoeK a radiation(l 0.71073 A); diffractometer was complimented with an areadetector (Photon 100 CCD) along with a cooler (Oxford Cryostream).APEX-II software was used to collect Data [41] and SAINTwas operated for integration [42] The SADABS (multi-scanapproach) was used for correction in absorption [43]. and intrinsicphasing (SHELXT)was employed to the solve the structure [44]. Fullleast squares refinement of all detected reflections were used todetermine the final cell constants and assign positions of all atomsother than H to the consequential difference maps via refinementagainst F2. Whereas H atoms were assigned location and addedagainst F2 and were refined by riding model. SHELXL-97 wasimplemented to refine anisotropically [45]. The CCDC (CSD depositionnumbers 1874544) of the structure has been deposited. Thedetailed characterization of compounds 3a e 3p are given insupporting informations.

As the paragraph descriping shows that 2879-20-1 is playing an increasingly important role.

Reference£º
Article; Shehzad, Muhammad Tariq; Khan, Ajmal; Islam, Muhammad; Hameed, Abdul; Khiat, Mohammed; Halim, Sobia Ahsan; Anwar, Muhammad U.; Shah, Syed Raza; Hussain, Javid; Csuk, Rene; Khan, Samra; Al-Harrasi, Ahmed; Shafiq, Zahid; Journal of Molecular Structure; vol. 1209; (2020);,
Benzodioxan
1,4-Benzodioxane | C8H8O2 – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.2879-20-1,1-(2,3-Dihydrobenzo[b][1,4]dioxin-6-yl)ethanone,as a common compound, the synthetic route is as follows.

A solution of 1-(2,3-dihydrobenzo[b][1,4]dioxin-6-yl)ethanone (XV) (1 eq) in THF was added slowly to a suspension of NaH (1.5 eq) in THF stirred under nitrogen at room temperature. The solution was further allowed to stir at room temperature until the evolution of gas was ceased. Ethyl picolinate (XIX) (1.1 eq) was added to the solution and refluxed overnight under nitrogen. The solution was cooled, poured into ice water and extracted with ethyl acetate. The organic layer was dried over MgSO4, filtered and concentrated under vacuum. The crude product was purified by column chromatography over silica gel to produce 1-(2,3-dihydrobenzo[b][1,4]dioxin-6-yl)-3-(pyridin-2-yl)propane-1,3-dione 15 as a yellow solid (71% yield), 1H NMR (CDCl3, 400 MHz): delta ppm 4.13-4.43 (m, 4H), 6.94 (d, J=8.31 Hz, 1H), 7.42 (m, 1H), 7.44 (m, 1H) 7.59 (m, 2H), 7.85 (m, 1H), 8.14 (d, J=7.81, 1H), 8.65 (m, 1H); ESIMS found C16H13NO4 m/z 284 (M+H).

2879-20-1 1-(2,3-Dihydrobenzo[b][1,4]dioxin-6-yl)ethanone 76143, abenzodioxans compound, is more and more widely used in various.

Reference£º
Patent; WINTHERIX, LLC; US2012/46320; (2012); A1;,
Benzodioxan
1,4-Benzodioxane | C8H8O2 – PubChem

2879-20-1, 1-(2,3-Dihydrobenzo[b][1,4]dioxin-6-yl)ethanone is a benzodioxans compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

General procedure: Equimolar quantities of substituted benzaldehyde and 1-(2H-1,3-benzodioxol-5-yl)ethan-1-one or 1-(2,3-dihydro-1,4-benzodioxin-6-yl)ethan-1-one were dissolved in 40% KOH and ethanol. The reactionmixture was then stirred for 10 h and poured into ice-cold water. Theprecipitated product was washed with water, dried, and recrystallizedfrom ethanol.

As the paragraph descriping shows that 2879-20-1 is playing an increasingly important role.

Reference£º
Article; Parambi, Della Grace Thomas; Oh, Jong Min; Baek, Seung Cheol; Lee, Jae Pil; Tondo, Anna Rita; Nicolotti, Orazio; Kim, Hoon; Mathew, Bijo; Bioorganic Chemistry; vol. 93; (2019);,
Benzodioxan
1,4-Benzodioxane | C8H8O2 – PubChem

2879-20-1, 1-(2,3-Dihydrobenzo[b][1,4]dioxin-6-yl)ethanone is a benzodioxans compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

General procedure: A series of sixteen novel 1, 4-benzodioxane-based thiosemicarbazones(3a-p) was synthesized by reacting appropriatethiosemicarbazide (1a-p) (5 mmol) and 1, 4-benzodioxan-6-ylmethyl ketone (2) (5 mmol) in methanol (15 mL) using glacialacetic acid (1e2 drops) as catalyst. Reflux at 80 C for 6 h wascarried out and the product formation and the reaction completion were examined by thin layer chromatography. Upon completion,the reaction mixturewas allowed to cool at r.t and the solid productwas collected by suction filtration followed by washing with hotmethanol and then dried in vacuum. Finally, the target thiosemicarbazonesderivatives were recrystallized from chloroformmethanolmixture (1:1) in good to excellent yields. The X-raymeasurements were read by mounting a 3m single crystal on agreased MiTe Gen loop and was inspected through thediffractometer (Bruker D8 Venture APEX diffractometer) at 296 (2)K by means of graphite-monochromated MoeK a radiation(l 0.71073 A); diffractometer was complimented with an areadetector (Photon 100 CCD) along with a cooler (Oxford Cryostream).APEX-II software was used to collect Data [41] and SAINTwas operated for integration [42] The SADABS (multi-scanapproach) was used for correction in absorption [43]. and intrinsicphasing (SHELXT)was employed to the solve the structure [44]. Fullleast squares refinement of all detected reflections were used todetermine the final cell constants and assign positions of all atomsother than H to the consequential difference maps via refinementagainst F2. Whereas H atoms were assigned location and addedagainst F2 and were refined by riding model. SHELXL-97 wasimplemented to refine anisotropically [45]. The CCDC (CSD depositionnumbers 1874544) of the structure has been deposited. Thedetailed characterization of compounds 3a e 3p are given insupporting informations.

As the paragraph descriping shows that 2879-20-1 is playing an increasingly important role.

Reference£º
Article; Shehzad, Muhammad Tariq; Khan, Ajmal; Islam, Muhammad; Hameed, Abdul; Khiat, Mohammed; Halim, Sobia Ahsan; Anwar, Muhammad U.; Shah, Syed Raza; Hussain, Javid; Csuk, Rene; Khan, Samra; Al-Harrasi, Ahmed; Shafiq, Zahid; Journal of Molecular Structure; vol. 1209; (2020);,
Benzodioxan
1,4-Benzodioxane | C8H8O2 – PubChem

2879-20-1, 1-(2,3-Dihydrobenzo[b][1,4]dioxin-6-yl)ethanone is a benzodioxans compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

General procedure: To 1-(2,3-dihydrobenzo[b][1,4]dioxin-6-yl)ethan-1-one(A) (1 mmol) alcohol solution (5 mL) was added substituted benzaldehyde(1 mmol). After dissolution, 50% NaOH (0.5 mL) was added. After confirming the completion of the reaction by thin layer chromatography, the sediment was filtered, washed with ethanol and dried to obtain chalcone

The synthetic route of 2879-20-1 has been constantly updated, and we look forward to future research findings.

Reference£º
Article; Yang, Yu-Shun; Yang, Bing; Zou, Yan; Li, Guigen; Zhu, Hai-Liang; Bioorganic and Medicinal Chemistry; vol. 24; 13; (2016); p. 3052 – 3061;,
Benzodioxan
1,4-Benzodioxane | C8H8O2 – PubChem

2879-20-1, 1-(2,3-Dihydrobenzo[b][1,4]dioxin-6-yl)ethanone is a benzodioxans compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

General procedure: A mixture of acetophenone 4a (120 mg, 1.0 mmol), iodine (254 mg, 1.0 mmol), and CuO (88 mg, 1.1 mmol) in anhydrous methanol (10 mL) was heated at reflux, after disappearance of the reactant (1-12 h, monitored by TLC), 1,2-diamines 2a (108 mg, 1.0 mmol) and K3PO4*3H2O (266 mg, 1.0 mmol) was added and the mixture was stirred for 12 h at 40 C. The solvent was removed under reduced pressure, and 50 mL water was added to mixture, extracted with EtOAc three times (3¡Á50 mL). The extract was washed with Na2S2O3, dried over anhydrous Na2SO4, and concentrated in vacuo. The residue was purified by column chromatography on silica gel using petroleum ether/EtOAc as the eluent to give the expected products 6aa as pale yellow solid, (80% yield).

As the paragraph descriping shows that 2879-20-1 is playing an increasingly important role.

Reference£º
Article; Lian, Mi; Li, Qi; Zhu, Yanping; Yin, Guodong; Wu, Anxin; Tetrahedron; vol. 68; 47; (2012); p. 9598 – 9605;,
Benzodioxan
1,4-Benzodioxane | C8H8O2 – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.2879-20-1,1-(2,3-Dihydrobenzo[b][1,4]dioxin-6-yl)ethanone,as a common compound, the synthetic route is as follows.

General procedure: A 10 mL glass flask equipped with a magnetic stir bar wascharged with a methyl ketone (1 mmol) and dissolved in MeCN (2 mL). To thethermostated solution NH4NO3 (10-25 mol %), I2 (50 mol %) and H2SO4(aqueous 96% solution, 10-20 mol %) were added and the flask was furtherequipped with a balloon filled with air (1 L) and magnetically stirred at 60 C.The consumption of starting material was monitored by TLC. After completionof the reaction, the mixture was cooled to room temperature, diluted withEtOAc (10 mL), and insoluble material identified as ammonium sulfate wasfiltered off. The filtrate neutralized with NaHCO3 (aqueous 10% solution, 2 mL)and Na2S2O3 (aqueous 10% solution, 2 mL) and phase was separated. The waterphase was washed with EtOAc additionally two times (2 5 mL). The combinedorganic phase was dried over anhydrous Na2SO4 and the solvent distilled underreduced pressure. The crude product obtained was analyzed by 1H NMR. Finallythe crude product was purified using column chromatography (SiO2, n-hexane/CH2Cl2 elution) and preparative thin layer chromatography to afford purematerial, which was compared to authentic samples. Detailed data, concerningcatalyst loading, reaction times, yields of pure products and their spectroscopicand other identification data are given in SI in the chapter Characterization dataof isolated final products. Characterization, for example, 1-(9H-fluoren-2-yl)-2-iodoethanone (2i): 1-(9H-Fluoren-2-yl)ethanone (1 mmol, 208.3 mg), NH4NO3(0.15 mmol, 12 mg), I2 (0.50 mmol, 126.7 mg), H2SO4 (aqueous 96% solution,0.10 mmol, 5.56 lL), 2 mL MeCN, balloon filled with 1 L of air, 60 C, 20 h were used; crystallization from acetone; yield: 187.2 mg (55%) yellow solid, mp 163-164 C. 1H NMR (303 MHz, CDCl3+two drops of DMSO, 25 C, TMS): d (ppm) 3.92 (s,2H), 4.41 (s, 2H), 7.32-7.44 (m, 2H), 7.54-7.59 (m, 1H), 7.77-7.84 (m, 2H), 7.96-8.02(m, 1H), 8.13 (s, 1H); 13C NMR (76.2MHz, CDCl3+two drops of DMSO, 25 C): d(ppm) 2.3, 36.6, 119.6, 120.7, 125.0, 125.3, 126.9, 128.1, 128.1, 131.5, 139.9, 143.2,144.3, 146.8, 192.4;MS (ESI):m/z 335 ((M+H)+, 100%);HR-MS (ESI):m/z = 334.9925,calcd for C15H12IO: 334.9933; Anal. calcd for C15H11IO: C, 53.92; H, 3.32; found: C,54.39; H, 3.05. 3-(2-Iodoacetyl)-2H-chromen-2-one (2o): 3-Acetyl-2H-chromen-2-one (1 mmol, 188.2mg), NH4NO3 (0.20 mmol, 16 mg), I2 (0.50 mmol, 126.7mg),H2SO4 (aqueous 96% solution, 0.1 mmol, 5.56 lL), 2mLMeCN, balloon filledwith 1 Lof air, 60 C, 23 h were used; column chromatography (SiO2, CH2Cl2); yield:182.2mg (58%), yellow solid; mp 135-138 C. 1H NMR (303.0 MHz, CDCl3, 25C,TMS): d (ppm) 4.68 (s, 2H), 7.34-7.46 (m, 2H), 7.64-7.76 (m, 2H), 8.66 (s, 1H); 13CNMR (76.2MHz, CDCl3, 25 C): d (ppm) 6.8, 116.7, 118.1, 121.4, 125.1, 130.2, 134.9,149.5, 155.3, 158.6, 190.1; MS (ESI): m/z 314.9 ((M+H)+, 100%); HR-MS (ESI): m/z = 314.9523, calcd for C11H8IO3: 314.9518.

2879-20-1 1-(2,3-Dihydrobenzo[b][1,4]dioxin-6-yl)ethanone 76143, abenzodioxans compound, is more and more widely used in various.

Reference£º
Article; Prebil, Rok; Stavber, Stojan; Tetrahedron Letters; vol. 55; 41; (2014); p. 5643 – 5647;,
Benzodioxan
1,4-Benzodioxane | C8H8O2 – PubChem

2879-20-1, 1-(2,3-Dihydrobenzo[b][1,4]dioxin-6-yl)ethanone is a benzodioxans compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

General procedure: Acetophenone 1a (120 mg, 1.0 mmol), pyridine 2a (158 mg, 2.0 mmol), and iodine (254 mg, 1.0 mmol) were placed in an oven-dried and argon filled Schlenk tube. After addition of anhydrous DMSO (5 mL), the mixture was stirred at 100 C for 36 h. After the reaction completed, the mixture was diluted with water and treated with Na2S2O3 (5% w/w, aq) until the color turned to pale yellow. The mixture was then extracted with CH2Cl2 (3¡Á20 mL), the combined organic extracts were dried over Na2SO4 and concentrated under reduced pressure. The crude product was purified by column chromatography on silica gel (eluent: CH2Cl2/EtOAc=200:1) to afford a yellow solid 3aa (122 mg, 85%).

2879-20-1 1-(2,3-Dihydrobenzo[b][1,4]dioxin-6-yl)ethanone 76143, abenzodioxans compound, is more and more widely used in various.

Reference£º
Article; Yang, Yan; Gao, Meng; Zhang, Dong-Xue; Wu, Liu-Ming; Shu, Wen-Ming; Wu, An-Xin; Tetrahedron; vol. 68; 36; (2012); p. 7338 – 7344;,
Benzodioxan
1,4-Benzodioxane | C8H8O2 – PubChem

2879-20-1, 1-(2,3-Dihydrobenzo[b][1,4]dioxin-6-yl)ethanone is a benzodioxans compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Sodium cyanoborohydride (18.7 mg, 0.3 mmol) was added to a mixture of intermediate 27 (50 mg, 0.2 mmol, hydrochloric acid salt), 6-acetyl-l,4-benzodioxane (CAS: 2879- 20-1; 70.7 mg, 3.97 mmol), triethylamine (0.069 mL, 0.5 mmol) and Ti(OiPr)4 (0.076 mL, 0.26 mmol) in anhydrous MeOH (0.48 mL). The resulting suspension was stirred at rt for 16 h and then the mixture was heated at 70 C and further stirred for 16 h. The mixture was cooled to rt and then filtered through a celite pad and the volatiles were evaporated in vacuo. Water and EtOAc were added. The organic phase was separated, dried over Na2S04, filtered and the filtrate was evaporated in vacuo. The resultant oil was purified by RP HPLC (Stationary phase: CI 8 XBridge 30 x 100 mm 5 muiotaeta), mobile phase: gradient from 47% 10 mM NH4CO3H pH 9 solution in water, 53% MeOH to 24% 10 mM NH4CO3H pH 9 solution in water, 76% MeOH) to yield product 40 as a white solid (20 mg, 27% yield).

The synthetic route of 2879-20-1 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; JANSSEN PHARMACEUTICA NV; BARTOLOME-NEBREDA, Jose, Manuel; TRABANCO-SUAREZ, Andres, Avelino; MARTINEZ VITURRO, Carlos, Manuel; TRESADERN, Gary, John; ALCAZAR-VACA, Manuel, Jesus; (126 pag.)WO2018/109198; (2018); A1;,
Benzodioxan
1,4-Benzodioxane | C8H8O2 – PubChem