Heterocyclic Building Blocks-benzodioxan

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.4442-53-9,2,3-Dihydrobenzo[b][1,4]dioxine-5-carboxylic acid,as a common compound, the synthetic route is as follows.

6,7-dibromo-1,4 -benzodioxane-5-carboxylic acid 1,440 ml of acetic acid and 360 g of 1,4-benzodioxane-5-carboxylic acid were introduced into a balloon flask provided with an agitator, an introduction funnel and a condenser. The mixture was heated to 55¡ã C. and then a solution of 700 g of bromine in 360 ml of acetic acid was added in portions. The mixture was heated to 120¡ã C. and then cooled to 15¡ã C. The precipitate was dried off, washed with acetic acid and dried. 332 g of 6,7-dibromo-1,4-benzodioxane-5-carboxylic acid were obtained (M.P.: 212¡ã C.). The structure was confirmed by nuclear magnetic resonance analysis.

As the paragraph descriping shows that 4442-53-9 is playing an increasingly important role.

Reference£º
Patent; Societe D’Etudes Scientifiques et Industrielles de L’ile-de-France; US4186135; (1980); A;,
Benzodioxan
1,4-Benzodioxane | C8H8O2 – PubChem

2879-20-1, 1-(2,3-Dihydrobenzo[b][1,4]dioxin-6-yl)ethanone is a benzodioxans compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

A solution of 1-(2,3-dihydrobenzo[b][1,4]dioxin-6-yl)ethanone (XXXII) (4.68 g, 26.3 mmol), dimethylamine hydrochloride (2.78 g, 34.1 mmol), paraformaldehyde (1.18 g, 39.4 mmol) and 12 N HCl (50 muL) in ethanol (8.0 mL) was refluxed overnight. The solution was cooled to room temperature and the ethanol was evaporated under vacuum. The residue was treated with EtOAc, heated slightly and sonicated to disperse into fine particles. The solids were filtered and dried at room temperature to produce 1-(2,3-dihydrobenzo[b][1,4]dioxin-6-yl)-3-(dimethylamino) propan-1-one hydrochloride as a white solid, (7.73 g, quantitative yield). The solid was cooled in minimum about of water (12 mL) and cooled to 0 C. A 20% aqueous solution of NaOH was added until pH=10. The solution was extracted with DCM, dried and evaporated to produce 1-(2,3-dihydrobenzo[b][1,4]dioxin-6-yl)-3-(dimethylamino) propan-1-one (XXXIII) a colorless oil (2.485 g, 10.6 mmol, 40.2% yield)1H NMR (CDCl3, 500 MHz): delta ppm 2.77 (s, 6H), 3.41 (m, 2H), 3.56 (m, 2H), 4.25 (m, 4H), 6.85 (m, 1H), 7.45 (m, 2H); ESIMS found C13H17NO3 m/z 236 (M+H)

2879-20-1 1-(2,3-Dihydrobenzo[b][1,4]dioxin-6-yl)ethanone 76143, abenzodioxans compound, is more and more widely used in various.

Reference£º
Patent; Kumar KC, Sunil; Wallace, David Mark; Hood, John; Barroga, Charlene F.; US2014/243349; (2014); A1;,
Benzodioxan
1,4-Benzodioxane | C8H8O2 – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.2879-20-1,1-(2,3-Dihydrobenzo[b][1,4]dioxin-6-yl)ethanone,as a common compound, the synthetic route is as follows.

General procedure: The initial carbonyl compound (50mmol) was dissolved/suspended in ethanol (50mL) and magnetically stirred with thiosemicarbazide (50mmol) and catalytic amounts of acetic acid for 8-24hat room temperature. The obtained thiosemicarbazone was filtered, washed with the appropriate solvent (n-hexane, petroleum ether or diethyl ether) and dried under vacuum. Ethyl-bromoacetate (50mmol) was added to a suspension of the intermediate thiosemicarbazone (50mmol) and sodium acetate (50mmol) in methanol (50mL) and the resulting mixture stirred at room temperature for 24-48h. The obtained crude 4-thiazolidinone was poured on ice, filtered or extracted with chloroform (3¡Á30mL) and purified by chromatography (SiO2, ethyl acetate/n-hexane 1/2) to give compounds 1a-58a in high yields. The product (50mmol) was dissolved/suspended in 50mL of anhydrous acetone in the presence of anhydrous potassium carbonate (50mmol), and reacted with equimolar amounts of benzyl bromide for 24-48h. The mixture was poured on ice, filtered or extracted with chloroform (3¡Á50mL) and purified by column chromatography (SiO2, ethyl acetate/n-hexane 1/3) in order to obtain compounds 1b-58b in high yield as previously reported [25,26].

As the paragraph descriping shows that 2879-20-1 is playing an increasingly important role.

Reference£º
Article; Carradori, Simone; Bizzarri, Bruna; D’Ascenzio, Melissa; De Monte, Celeste; Grande, Rossella; Rivanera, Daniela; Zicari, Alessanda; Mari, Emanuela; Sabatino, Manuela; Patsilinakos, Alexandros; Ragno, Rino; Secci, Daniela; European Journal of Medicinal Chemistry; vol. 140; (2017); p. 274 – 292;,
Benzodioxan
1,4-Benzodioxane | C8H8O2 – PubChem

274910-19-9, (2,3-Dihydrobenzo[b][1,4]dioxin-5-yl)methanol is a benzodioxans compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

(2, 3-Dihydrobenzor1, 41dioxin-5-yl)-chloromethane; Dissolve (2,3-Dihydrobenzo [1, 4] dioxin-5-yl) methanol (1.8 g, 10.8 mmol) in dichloromethane (15 mL). Add neat thionyl chloride (2 mL, 27.4 mmol) dropwise to the stirring reaction mixture at 25C under nitrogen. Stir the reaction for 15 minutes and concentrate under reduced pressure to obtain 2.0 g (100%) of the desired compound as a yellow oil. HRMS : m/z = 184.0290 (M)

As the paragraph descriping shows that 274910-19-9 is playing an increasingly important role.

Reference£º
Patent; ELI LILLY AND COMPANY; WO2003/76442; (2003); A1;,
Benzodioxan
1,4-Benzodioxane | C8H8O2 – PubChem

37924-85-9, 3-(Bromomethyl)benzo[d]isoxazole is a Benzisoxazole compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Step 1: To a -78 C solution of ((S)-2-oxo-2,3,4,5-tetrahydro-1H-benzo[bl[1,4ldiazepin- 3-yl)-carbamic acid tert-butyl ester (807 mg, 2.91 mmol) in THF (19.4 mL) was added lithium bis(trimethylsilyl)amide (3.2 mL, 1.0 M solution in THF, 3.2 mmol), dropwise. The mixture was stirred at -78 C for 15 mm, then a mixture of Nal (523 mg, 3.49 mmol) and 3- (bromomethyl)benzo[dlisoxazole (740 mg, 3.49 mmol) in THF (9.7 mL) was added dropwise over 10 mm. The mixture was stirred at -78 C for 50 mm., warmed to RT and stirred for 4.5 h. The mixture was diluted with 1 N citric acid and extracted with EtOAc. The combined extractswere washed with sat. aq. NaHCO3, brine, dried over Na2SO4, filtered, and concentrated. The residue was purified by flash chromatography. The resulting material was repurified by flash chromatography to provide a -4:1 mixture of (S)-tert-butyl 1-(benzo[dlisoxazol-3-ylmethyl)-2- oxo-2,3 ,4,5-tetrahydro- 1 H-benzo [bI [1 ,4jdiazepin-3-ylcarbamate and (S)-tert-butyl 1- (benzo [djisoxazol-3 -ylmethyl)-4-oxo-2,3 ,4,5 -tetrahydro- 1 H-benzo [bI [1,41 diazepin-3-ylcarbamate (742 mg, 63 %) as a yellow foam. LC-MS mlz 431 [M+Naj.

As the paragraph descriping shows that 37924-85-9 is playing an increasingly important role.

Reference£º
Patent; F. HOFFMANN-LA ROCHE AG; HOFFMANN-LA ROCHE INC.; CHEN, Shaoqing; DONNELL, Andrew F.; KESTER, Robert Francis; LE, Kang; LOU, Yan; MICHOUD, Christophe; REMISZEWSKI, Stacy; RUPERT, Kenneth C.; WEISEL, Martin; WO2015/71393; (2015); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.89976-56-7,5-Methylbenzo[d]isoxazol-3-amine,as a common compound, the synthetic route is as follows.

Benzoic isoxazol-3-bis(N,N-t-butoxycarbonyl)amine (122): To a solution of 121 (148 mg, 1 mmol) in DCM (2 mL) was added di-t-butyldicarbonate (546 mg, 2.5 mmol), DIEA (0.348 mL, 2 mmol), and DMAP (22.2 mg, 1 mmol) at O0C. The reaction was warmed up to RT and stirred for 4 hr and then diluted with ethyl acetate and treated with aqueous ammonium chloride to pH 6. The organic layer was separated and washed with brine and concentrated in vacuo. The residue purified by silica gel chromatography using 100% hexane as the eluent to yield 122 (347 mg, 100%), LC-MS (ESI) m/z 348.8.

The synthetic route of 89976-56-7 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; DAIAMED, INC.; WO2006/108039; (2006); A2;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

36216-80-5, Benzo[d]isoxazol-3-amine is a Benzisoxazole compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

EXAMPLE 7 N-[2-(4-Morpholinyl)ethyl]-1,2-benzisoxazol-3-amine To a solution of 3-amino-1,2-benzisoxazole (3.5 g) in N,N-dimethylformamide (DMF) (100 ml) was added sodium hydride (0.8 g) under nitrogen. The reaction was stirred one hour at ambient temperature. A solution of 4-(2-chloroethyl)morpholine (4.0 g) in DMF (50 ml) was added followed by heating to 120 C. for one hour. TLC (5% MeOH/DCM) analysis revealed the absence of starting material. The reaction was quenched with water and extracted with EtOAc. The organic layer was washed with water, dried (MgSO4), and concentrated in vacuo. Flash column chromatography (silica gel) eluding with 1.5-2.5% MeOH/DCM afforded the product (2.5 g), m.p. 79-80 C. ANALYSIS: Calculated for C13 H17 N3 O2: 63.14%C 6.93%H 16.99%N Found: 63.47%C 6.87%H 16.95%N

36216-80-5 Benzo[d]isoxazol-3-amine 2779749, aBenzisoxazole compound, is more and more widely used in various.

Reference£º
Patent; Hoechst-Roussel Pharmaceutical Incorporated; US5494908; (1996); A;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.36216-80-5,Benzo[d]isoxazol-3-amine,as a common compound, the synthetic route is as follows.

A mixture of benzo[d]isoxazol-3-amine and a sulfonyl chloride in pyridine (0.5 ml.) was stirred at room temperature for 64 hours. The reaction was concentrated and diluted with 5% aqueous HCI (1 ml.) and sonicated for a minimum of 30 minutes. The resulting precipitate was collected by filtration and a portion of the crude material (50 mg or less) was purified by preparative mass-directed HPLC to give the desired product. See Table B for reaction components and amounts used.

The synthetic route of 36216-80-5 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; CTXT PTY LIMITED; STUPPLE, Paul, Anthony; LAGIAKOS, Helen, Rachel; MORROW, Benjamin, Joseph; FOITZIK, Richard, Charles; HEMLEY, Catherine, Fae; CAMERINO, Michelle, Ang; BOZIKIS, Ylva, Elisabet, Bergman; WALKER, Scott, Raymond; (321 pag.)WO2019/243491; (2019); A1;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

719-64-2, 5-Chloro-3-phenylbenzo[c]isoxazole is a Benzisoxazole compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

A, in a reaction vessel equipped with a stirrer, a reflux condenser, 5-chloro-3-phenyl-benzisoxazole 0.26 mol, the mass fraction of 30% 2-bromo-5-fluoronitrobenzene solution 390ml, nickel chloride powder 0.46 mol, control the stirring speed at 190 rpm, raise the solution temperature to 78 C, reflux reaction 120 min; B, adding 90% of 4-chlorophenethylamine solution with a mass fraction of 21% slowly add the ethylene glycol dimethyl ether solution with a mass fraction of 37% adding time to control at 110min, continue to reflux reaction 5h. C, add the mass fraction of 27% sodium bicarbonate solution 200ml, reduce the solution temperature to 16 C, molecular sieve bleaching, filtration, the filtrate was concentrated, again lowering the solution temperature to 5 C, the mass fraction of 70% triethylamine solution washing, calcium oxide dehydrating agent dehydration, to give crystals of 2-amino-5-chlorobenzophenone 55.59 g, yield 92%.

719-64-2 5-Chloro-3-phenylbenzo[c]isoxazole 347291, aBenzisoxazole compound, is more and more widely used in various.

Reference£º
Patent; Chengdu Qiesite Technology Co., Ltd.; Peng Fei; (9 pag.)CN106083621; (2016); A;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.36216-80-5,Benzo[d]isoxazol-3-amine,as a common compound, the synthetic route is as follows.

A mixture of intermediate 3 (0.0025 mol) and triethylamine (0.0025 mol) in CHzClz (10 ml) was stirred at RT. 2-methylpropanoyl chloride (0.0025 mol) was added dropwise and the reaction mixture stirred overnight at RT. The reaction mixture was washed 2 times with H20. The organic layer was separated, dried (MgS04), filtered off and the solvent was evaporated dry. The residue was further purified by column chromatography over silicagel (eluent: CH2Cl2) yielding 0.235 g of compound 8 and a fraction which was further purified using reversed phase HPLC chromatography on a Xterra MS C18 column (3. 5, um, 4.6 x 100 mm) with a flow rate of 1.6 m ./min (Elution conditions: three mobile phases (mobile phase A 95% 25mM ammoniumacetate + 5% acetonitrile; mobile phase B: acetonitrile ; mobile phase C: methanol) were employed to run a gradient condition from 100 % A to 50% B and 50% C in 6.5 min. , to 100 % B in 1 min, 100% B for 1 min. and re-equilibrate with 100 % A for 1.5 min.) yielding 0.010 g of compound 7 (Melting Point 130C).

36216-80-5 Benzo[d]isoxazol-3-amine 2779749, aBenzisoxazole compound, is more and more widely used in various.

Reference£º
Patent; JANSSEN PHARMACEUTICA N.V.; WO2005/89753; (2005); A2;,
Benzisoxazole – Wikipedia
Benzisoxazole – an overview | ScienceDirect Topics