Category: 2879-20-1

2879-20-1, 1-(2,3-Dihydrobenzo[b][1,4]dioxin-6-yl)ethanone is a benzodioxans compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

General procedure: A series of sixteen novel 1, 4-benzodioxane-based thiosemicarbazones(3a-p) was synthesized by reacting appropriatethiosemicarbazide (1a-p) (5 mmol) and 1, 4-benzodioxan-6-ylmethyl ketone (2) (5 mmol) in methanol (15 mL) using glacialacetic acid (1e2 drops) as catalyst. Reflux at 80 C for 6 h wascarried out and the product formation and the reaction completion were examined by thin layer chromatography. Upon completion,the reaction mixturewas allowed to cool at r.t and the solid productwas collected by suction filtration followed by washing with hotmethanol and then dried in vacuum. Finally, the target thiosemicarbazonesderivatives were recrystallized from chloroformmethanolmixture (1:1) in good to excellent yields. The X-raymeasurements were read by mounting a 3m single crystal on agreased MiTe Gen loop and was inspected through thediffractometer (Bruker D8 Venture APEX diffractometer) at 296 (2)K by means of graphite-monochromated MoeK a radiation(l 0.71073 A); diffractometer was complimented with an areadetector (Photon 100 CCD) along with a cooler (Oxford Cryostream).APEX-II software was used to collect Data [41] and SAINTwas operated for integration [42] The SADABS (multi-scanapproach) was used for correction in absorption [43]. and intrinsicphasing (SHELXT)was employed to the solve the structure [44]. Fullleast squares refinement of all detected reflections were used todetermine the final cell constants and assign positions of all atomsother than H to the consequential difference maps via refinementagainst F2. Whereas H atoms were assigned location and addedagainst F2 and were refined by riding model. SHELXL-97 wasimplemented to refine anisotropically [45]. The CCDC (CSD depositionnumbers 1874544) of the structure has been deposited. Thedetailed characterization of compounds 3a e 3p are given insupporting informations.

The synthetic route of 2879-20-1 has been constantly updated, and we look forward to future research findings.

Reference£º
Article; Shehzad, Muhammad Tariq; Khan, Ajmal; Islam, Muhammad; Hameed, Abdul; Khiat, Mohammed; Halim, Sobia Ahsan; Anwar, Muhammad U.; Shah, Syed Raza; Hussain, Javid; Csuk, Rene; Khan, Samra; Al-Harrasi, Ahmed; Shafiq, Zahid; Journal of Molecular Structure; vol. 1209; (2020);,
Benzodioxan
1,4-Benzodioxane | C8H8O2 – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.2879-20-1,1-(2,3-Dihydrobenzo[b][1,4]dioxin-6-yl)ethanone,as a common compound, the synthetic route is as follows.

General procedure: In a typical reaction, acetophenone (0.4 mmol) and I2 (0.4 mmol)was stirred in DMSO (1 mL) at 60C for 6 h. After the mixture was cooled to room temperature and subsequently, 2-methylindol(0.2 mmol), sesamol (0.2 mmol) were added to the reaction solutionalong with PTSA (0.04 mmol, 20 mol %). The mixture was then stirred at 80C for 3 h. At the end of the reaction,water (10 mL)was added and then extracted with EtOAc (310 mL). The acquired organic phase was combined and dried with anhydrous Na2SO4.The volatile components were removed under reduced pressure.The product was obtained by isolation with preparative TLC (elutingsolution: petroleum ether/dichloromethane1/2 (v/v)). Tests for substrate scope and the reaction of using other nucleophiles were all performed according to an analogous procedure. Whena 10 mmol scale reaction was conducted, the product was isolated by silica column chromatography.

2879-20-1 1-(2,3-Dihydrobenzo[b][1,4]dioxin-6-yl)ethanone 76143, abenzodioxans compound, is more and more widely used in various.

Reference£º
Article; Cheng, Cheng; Liu, Changhui; Gu, Yanlong; Tetrahedron; vol. 71; 42; (2015); p. 8009 – 8017;,
Benzodioxan
1,4-Benzodioxane | C8H8O2 – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.2879-20-1,1-(2,3-Dihydrobenzo[b][1,4]dioxin-6-yl)ethanone,as a common compound, the synthetic route is as follows.

General procedure: 1a-j (0.0299 – 0.0532 g, 0.299 mmol, 1 eq.), 2a-d (0.0166 – 0.228 g, 0.224 mmol, 0.75 eq.), FeCl3 (0.0145 g, 0.0897 mmol, 0.3 eq.), (NH4)2S2O8 (0.1363 g, 0.598 mmol, 2 eq.), and DCE / CCl4 (0.75 mL, 1 / 1) were stirred in Schott culture tubes (H ¡Á diam. 160 mm ¡Á 16 mm) at 120 C for 3 h. Further, after adding a solution of 2a-d (0.055 – 0.0763, 0.0748 mmol, 0.25 eq.) and DCE / CCl4 (0.08 mL, 1 / 1), the reaction mixture was stirred at 120 C for 3 h (3 times at 3-hour intervals). Next it was stirred at 120 C for 12 h. The yields of 3a-f,a-d were determined by 1H NMR (CDCl3) after the filtration of the reaction mass through a thin pad (0.4 – 0.5 cm) of silica gel (0.015 – 0.040 mm) using 20 mL of DCM and evaporation of solvent in vacuum. Products 3c,b and 3d,a-d were isolated by gradient flash chromatography (eluent: petroleum ether / ethyl acetate).

The synthetic route of 2879-20-1 has been constantly updated, and we look forward to future research findings.

Reference£º
Article; Arzumanyan, Ashot V.; Tetrahedron Letters; vol. 58; 50; (2017); p. 4667 – 4671;,
Benzodioxan
1,4-Benzodioxane | C8H8O2 – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.2879-20-1,1-(2,3-Dihydrobenzo[b][1,4]dioxin-6-yl)ethanone,as a common compound, the synthetic route is as follows.

General procedure: 1a-j (0.0299 – 0.0532 g, 0.299 mmol, 1 eq.), 2a-d (0.0166 – 0.228 g, 0.224 mmol, 0.75 eq.), FeCl3 (0.0145 g, 0.0897 mmol, 0.3 eq.), (NH4)2S2O8 (0.1363 g, 0.598 mmol, 2 eq.), and DCE / CCl4 (0.75 mL, 1 / 1) were stirred in Schott culture tubes (H ¡Á diam. 160 mm ¡Á 16 mm) at 120 C for 3 h. Further, after adding a solution of 2a-d (0.055 – 0.0763, 0.0748 mmol, 0.25 eq.) and DCE / CCl4 (0.08 mL, 1 / 1), the reaction mixture was stirred at 120 C for 3 h (3 times at 3-hour intervals). Next it was stirred at 120 C for 12 h. The yields of 3a-f,a-d were determined by 1H NMR (CDCl3) after the filtration of the reaction mass through a thin pad (0.4 – 0.5 cm) of silica gel (0.015 – 0.040 mm) using 20 mL of DCM and evaporation of solvent in vacuum. Products 3c,b and 3d,a-d were isolated by gradient flash chromatography (eluent: petroleum ether / ethyl acetate).

The synthetic route of 2879-20-1 has been constantly updated, and we look forward to future research findings.

Reference£º
Article; Arzumanyan, Ashot V.; Tetrahedron Letters; vol. 58; 50; (2017); p. 4667 – 4671;,
Benzodioxan
1,4-Benzodioxane | C8H8O2 – PubChem