Day: October 23, 2020

1-(2,3-Dihydrobenzo[b][1,4]dioxin-6-yl)ethanone, cas is 2879-20-1, it is a common heterocyclic compound, the benzodioxans compound, its synthesis route is as follows.

The specific steps are: Add compound 10 (0.5 mmol) to a 38 mL pressure tube. After iodine (0.25 mmol) and 2 mL of DMSO were subjected to a first reaction at 100 C for 90 min, 2-aminobenzonitrile (0.4 mmol) was added to the reaction mixture. KHS¡¤H2O (1 mmol) was subjected to a second reaction at 90 C, after 20 hours, The reaction mixture was extracted with ethyl acetate. The organic layer was washed with saturated sodium sulfate The solvent is distilled off under reduced pressure to obtain a crude product. Crude products with petroleum ether and ethyl acetateThe mixture is purified by column chromatography to obtain a yellow liquid. The total yield was 69%., 2879-20-1

As the rapid development of chemical substances, we look forward to future research findings about 2879-20-1

Reference£º
Patent; Central China Normal University; Geng Xiao; Wu Xia; Wu Yandong; Wu Anxin; (15 pag.)CN109232366; (2019); A;,
Benzodioxan
1,4-Benzodioxane | C8H8O2 – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.4442-54-0,2,3-Dihydro-1,4-benzodioxine-6-carboxylic acid,as a common compound, the synthetic route is as follows.

Compound 239, N-(2-bromo-5-(2,3-dihydrobenzo[b][1,4]dioxine-6-carboxamido)phenyl)-2-methylquinoline-6-carboxamide[00332] To a suspension of 2,3-dihydrobenzo[b][1 ,4]dioxine-6-carboxylic acid(1 .001 g, 5.56 mmol) in dry DCM (20 mL), DMF (0.972 muIota, 0.013 mmol) and oxalyl chloride (0.513 mL, 6.06 mmol) were added dropwise and the resulting green solution was allowed to stir at 20 ¡ãC for 3 hours after which it was concentrated under vacuum to afford a dry pale green solid. The solid was dissolved in pyridine (20.00 mL) and Lambda/-(5- amino-2-bromophenyl)-2-methylquinoline-6-carboxamide (1 .80 g, 5.05 mmol) was added in one portion. The resulting dark yellow suspension was allowed to stir for 72 hours after which it was poured onto water. The yellow precipitate was filtered and washed several times with water, Et20 and finally with a minimum amount of DCM to afford the crude product as a pale yellow solid which does not require further purification (2.1 1 g, 81 percent).1H-NMR (500 MHz, DMSO): delta 10.29 (s, 1 H), 10.27 (s, 1 H), 8.63 (s, 1 H), 8.42 (d, J =9.1 1 Hz, 1 H), 8.25 (d, J = 7.29 Hz, 1 H), 8.10 (s, 1 H), 8.05 (d, J = 8.20 Hz, 1 H), 7.69 (bs, 2H), 7.58-7.49 (m, 3H), 6.99 (d, J = 9.1 1 Hz, 1 H), 4.37-4.27 (m, 4H), 2.71 (s, 3H). HRMS (ESI+): Found [M+H]+520.0723 C26H21BrN3O4 requires 520.0693.

4442-54-0, The synthetic route of 4442-54-0 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; CANCER RESEARCH TECHNOLOGY LIMITED; JONES, Keith; RYE, Carl; CHESSUM, Nicola; CHEESEMAN, Matthew; PASQUA, Adele Elisa; PIKE, Kurt Gordon; FAULDER, Paul Frank; WO2015/49535; (2015); A1;,
Benzodioxan
1,4-Benzodioxane | C8H8O2 – PubChem

As a common heterocyclic compound, it belong benzodioxans compound,1-(2,3-Dihydrobenzo[b][1,4]dioxin-6-yl)ethanone,2879-20-1,Molecular formula: C10H10O3,mainly used in chemical industry, its synthesis route is as follows.,2879-20-1

General procedure: A series of sixteen novel 1, 4-benzodioxane-based thiosemicarbazones(3a-p) was synthesized by reacting appropriatethiosemicarbazide (1a-p) (5 mmol) and 1, 4-benzodioxan-6-ylmethyl ketone (2) (5 mmol) in methanol (15 mL) using glacialacetic acid (1e2 drops) as catalyst. Reflux at 80 C for 6 h wascarried out and the product formation and the reaction completion were examined by thin layer chromatography. Upon completion,the reaction mixturewas allowed to cool at r.t and the solid productwas collected by suction filtration followed by washing with hotmethanol and then dried in vacuum. Finally, the target thiosemicarbazonesderivatives were recrystallized from chloroformmethanolmixture (1:1) in good to excellent yields. The X-raymeasurements were read by mounting a 3m single crystal on agreased MiTe Gen loop and was inspected through thediffractometer (Bruker D8 Venture APEX diffractometer) at 296 (2)K by means of graphite-monochromated MoeK a radiation(l 0.71073 A); diffractometer was complimented with an areadetector (Photon 100 CCD) along with a cooler (Oxford Cryostream).APEX-II software was used to collect Data [41] and SAINTwas operated for integration [42] The SADABS (multi-scanapproach) was used for correction in absorption [43]. and intrinsicphasing (SHELXT)was employed to the solve the structure [44]. Fullleast squares refinement of all detected reflections were used todetermine the final cell constants and assign positions of all atomsother than H to the consequential difference maps via refinementagainst F2. Whereas H atoms were assigned location and addedagainst F2 and were refined by riding model. SHELXL-97 wasimplemented to refine anisotropically [45]. The CCDC (CSD depositionnumbers 1874544) of the structure has been deposited. Thedetailed characterization of compounds 3a e 3p are given insupporting informations.

With the synthetic route has been constantly updated, we look forward to future research findings about 1-(2,3-Dihydrobenzo[b][1,4]dioxin-6-yl)ethanone,belong benzodioxans compound

Reference£º
Article; Shehzad, Muhammad Tariq; Khan, Ajmal; Islam, Muhammad; Hameed, Abdul; Khiat, Mohammed; Halim, Sobia Ahsan; Anwar, Muhammad U.; Shah, Syed Raza; Hussain, Javid; Csuk, Rene; Khan, Samra; Al-Harrasi, Ahmed; Shafiq, Zahid; Journal of Molecular Structure; vol. 1209; (2020);,
Benzodioxan
1,4-Benzodioxane | C8H8O2 – PubChem

4442-54-0, 2,3-Dihydro-1,4-benzodioxine-6-carboxylic acid is a benzodioxans compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Step 1.5-(2,3-Dihydrobenzo[b][1,4]dioxine-6-carbonyl)-2,2-dimethyl-1,3-dioxane-4,6-dioneA solution of 2,3-dihydrobenzo[b][1,4]dioxine-6-carboxylic acid (5 g, 27.8 mmol), 2,2-dimethyl-1,3-dioxane-4,6-dione (4.41 g, 30.6 mmol), 4-dimethylaminopyridine (5.1 g, 41.7 mmol) and EDC HCl (8.0 g, 41.7 mmol) in dichloromethane (125 mL) was stirred overnight at room temperature, and then quenched by the addition of HCl (1 N, 100 mL) and NaCl solution (100 mL).The organic layers were dried over sodium sulfate and concentrated in vacuo to afford 5-(2,3-dihydrobenzo[b][1,4]dioxine-6-carbonyl)-2,2-dimethyl-1,3-dioxane-4,6-dione as a yellow solid (8 g, crude).It was used for next step without further purification.

4442-54-0, The synthetic route of 4442-54-0 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; BIOENERGENIX; US2012/277224; (2012); A1;,
Benzodioxan
1,4-Benzodioxane | C8H8O2 – PubChem

Name is (2,3-Dihydrobenzo[b][1,4]dioxin-6-yl)methanamine, as a common heterocyclic compound, it belongs to benzodioxans compound, and cas is 17413-10-4, its synthesis route is as follows.,17413-10-4

Comparative Example 2 2,6-dichloro-N-[(2,3-dihydro-1,4-benzodioxin-6-yl)methyl]benzamide To a mixture of 2,3-dihydro-1,4-benzodioxin-6-yl)methylamine (50 mg, 0.30 mmol) and dichloromethane (1 mL) were added N,N-diisopropylethylamine (0.11 mL, 0.61 mmol) and 2,6-dichlorobenzoyl chloride (0.043 mL, 0.30 mmol) under ice cooling and the resultant was stirred at room temperature for 3 hours. The reaction mixture was purified by column chromatography on silica gel (heptane:ethyl acetate=2:1) to give the title compound (94 mg, 92% yield), 1H-NMR Spectrum (CDCl3) delta (ppm): 4.24 (s, 4 H), 4.57 (d, J=5.47 Hz, 2 H), 5.94 (br. s, 1 H), 6.81-6.92 (m, 3 H), 7.21 -7.33 (m, 3 H).

With the complex challenges of chemical substances, we look forward to future research findings about (2,3-Dihydrobenzo[b][1,4]dioxin-6-yl)methanamine

Reference£º
Patent; Eisai R&D Management Co., Ltd.; Tanaka, Keigo; Ishida, Tasuku; Miyano, Masayuki; Shinkyo, Raku; US2019/231720; (2019); A1;,
Benzodioxan
1,4-Benzodioxane | C8H8O2 – PubChem

As a common heterocyclic compound, it belongs to benzodioxans compound, name is 1-(2,3-Dihydrobenzo[b][1,4]dioxin-6-yl)ethanone, and cas is 2879-20-1, its synthesis route is as follows.,2879-20-1

General procedure: To 1-(2,3-dihydrobenzo[b][1,4]dioxin-6-yl)ethan-1-one(A) (1 mmol) alcohol solution (5 mL) was added substituted benzaldehyde(1 mmol). After dissolution, 50% NaOH (0.5 mL) was added. After confirming the completion of the reaction by thin layer chromatography, the sediment was filtered, washed with ethanol and dried to obtain chalcone

With the complex challenges of chemical substances, we look forward to future research findings about 2879-20-1,belong benzodioxans compound

Reference£º
Article; Yang, Yu-Shun; Yang, Bing; Zou, Yan; Li, Guigen; Zhu, Hai-Liang; Bioorganic and Medicinal Chemistry; vol. 24; 13; (2016); p. 3052 – 3061;,
Benzodioxan
1,4-Benzodioxane | C8H8O2 – PubChem

As a common heterocyclic compound, it belong benzodioxans compound,2,3-Dihydro-1,4-benzodioxine-6-carboxylic acid,4442-54-0,Molecular formula: C9H8O4,mainly used in chemical industry, its synthesis route is as follows.,4442-54-0

General procedure: To a solution of corresponding acids (RCOOH, 0.63 mmol), HOBt (170 mg, 1.26 mmol), EDCI (242 mg, 1.26 mmol), and DIPEA (0.208 mL, 1.26 mmol) were added to DMA (60 mL), and then 4 (186 mg, 1.26mmol) were added, the mixture was stirred overnight. The mixture was dissolved in water, then the aqueous solution was extracted with ethyl acetate (50 mL 3). The combined organic layers were washed with brine, dried over anhydrous sodium sulfate and concentrated to give the crude product, which was purified by column chromatography to give N-(4-nitrophenethyl)amide (5) in a good yield. And to a solution of 5 in MeOH was added 10percent Pd/C under H2 at reflux overnight, then the mixture was dissolved in water, then the aqueous solution was extracted with ethyl acetate (50 mL 3). The combined organic layers were washed with brine, dried over anhydrous sodium sulfate and concentrated to give the crude product, which was purified by column chromatography to give N-(4-aminophenethyl)amide (6) in a good yield. Then the mixture of 3 and 6 was added NaCNBH3 in MeOH and the solution was stirred under reflux overnight. After reaction completed, the solvent was removed under reduced pressure and the residue was dissolved in water, the aqueous solution was extracted with ethyl acetate (50 mL 3). The combined organic layers were washed with brine, dried over anhydrous sodium sulfate and concentrated to give the crude product, which was purified by column chromatography to afford the corresponding compounds (7-26) in good yields.

With the synthetic route has been constantly updated, we look forward to future research findings about 2,3-Dihydro-1,4-benzodioxine-6-carboxylic acid,belong benzodioxans compound

Reference£º
Article; Chen, Wenhua; Yao, Xue; Huang, Zhenghui; Mao, Fei; Guan, Longfei; Tang, Yun; Jiang, Hualiang; Li, Jian; Huang, Jin; Jiang, Lubin; Zhu, Jin; Chinese Chemical Letters; (2019); p. 250 – 254;,
Benzodioxan
1,4-Benzodioxane | C8H8O2 – PubChem

2,3-Dihydro-1,4-benzodioxine-6-carboxylic acid, cas is 4442-54-0, it is a common heterocyclic compound, the benzodioxans compound, its synthesis route is as follows.,4442-54-0

Example 129, N-(5-(2,3-dihydrobenzo[b][1,4]dioxine-6-carboxamido)-2-(trifluoromethyl)phenyl)-2-methylquinoline-6-carboxamide[00180] Phosphorus oxychloride (0.196 mL, 2.10 mmol) was added dropwise to a stirred suspension of 2,3-dihydrobenzo[b][1 ,4]dioxine-6-carboxylic acid (172 mg, 0.96 mmol), Compound 137 (330 mg, 0.96 mmol) and DIPEA (0.832 mL, 4.78 mmol) in DCM (5 mL) at 0 ¡ãC. The reaction mixture was allowed to come to ambient temperature and stirred for 4 days. A saturated aqueous solution of sodium bicarbonate (50 mL) was added carefully over 30 mins then the mixture was extracted with DCM (2 x 50 mL). The combined organics were washed with brine, passed through a phase separating cartridge and concentrated in vacuo to give a yellow solid. The crude product was purified by preparative HPLC. Fractions containing the desired compound were evaporated to dryness to afford the desired material as a white solid (26 mg, 5 percent).1H NMR (400 MHz, DMSO) delta 10.42 (s, 1 H), 10.32 (s, 1 H), 8.56 (d, J = 1 .9 Hz, 1 H), 8.41 (d, J = 8.5 Hz, 1 H), 8.21 (dd, J = 2.0, 8.8 Hz, 1 H), 8.09 – 8.01 (m, 2H), 7.97 (d, J = 8.7 Hz, 1 H), 7.78 (d, J = 8.9 Hz, 1 H), 7.64 – 7.44 (m, 3H), 7.01 (d, J = 8.4 Hz, 1 H), 4.39 – 4.24 (m, 4H), 2.71 (s, 3H). m/z (ES+) (M+H)+ = 508.4.

With the rapid development of chemical substances, we look forward to future research findings about 2,3-Dihydro-1,4-benzodioxine-6-carboxylic acid

Reference£º
Patent; CANCER RESEARCH TECHNOLOGY LIMITED; JONES, Keith; RYE, Carl; CHESSUM, Nicola; CHEESEMAN, Matthew; PASQUA, Adele Elisa; PIKE, Kurt Gordon; FAULDER, Paul Frank; WO2015/49535; (2015); A1;,
Benzodioxan
1,4-Benzodioxane | C8H8O2 – PubChem

4442-54-0, 2,3-Dihydro-1,4-benzodioxine-6-carboxylic acid is a benzodioxans compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Method I Ba (1 mmol) and 2,3-dihydrobenzo[b][1,4]dioxin-6-carboxylic acid (or 2,3-dihydrobenzo[b][1,4]dioxin-2-carboxylic acid) (1 mmol) together with EDCI (1.5 mmol) and HOBt (0.05 mmol) in CH2Cl2 (20 mL) were refluxed at room temperature for 10 h. While the reaction completed, the solution was washed with water for three times (30 mL each time). The remaining water layer was extracted by EtOAc for three times (30 mL each time). The organic layers (CH2Cl2 and EtOAc) were combined and then evaporated. The separated solid was crystallized from mixture of DMF and ethanol (9:1) to obtain the corresponding compound as translucent solid. 4.5.3 (2,3-Dihydrobenzo[b][1,4]dioxin-6-yl)(3-(4-methoxyphenyl)-5-phenyl-4,5-dihydro-1H-pyrazol-1-yl)methanone (C3) White crystal, mp: 199-200 ¡ãC. 1H NMR (CDCl3, 300 MHz) delta: 3.70-3.80 (m, 2H), 3.84 (s, 3H), 4.28-4.30 (m, 4H), 5.77-5.80 (m, 1H), 6.89-6.94 (m, 3H), 7.24-7.26 (m, 1H), 7.31-7.32 (d, 4H, J = 2.1 Hz), 7.64-7.72 (m, 4H). MS (ESI): 415.16 (C25H23N2O4, [M+H]+). Anal. Calcd for C25H22N2O4: C, 72.45; H, 5.35; N, 6.76; O, 15.44. Found: C, 72.11; H, 5.33; N, 6.77.

4442-54-0, The synthetic route of 4442-54-0 has been constantly updated, and we look forward to future research findings.

Reference£º
Article; Yang, Yu-Shun; Li, Qing-Shan; Sun, Shuai; Zhang, Yan-Bin; Wang, Xiao-Liang; Zhang, Fei; Tang, Jian-Feng; Zhu, Hai-Liang; Bioorganic and Medicinal Chemistry; vol. 20; 20; (2012); p. 6048 – 6058;,
Benzodioxan
1,4-Benzodioxane | C8H8O2 – PubChem

As a common heterocyclic compound, it belongs to benzodioxans compound, name is 1-(2,3-Dihydrobenzo[b][1,4]dioxin-6-yl)ethanone, and cas is 2879-20-1, its synthesis route is as follows.,2879-20-1

General procedure: To 1-(2,3-dihydrobenzo[b][1,4]dioxin-6-yl)ethan-1-one(A) (1 mmol) alcohol solution (5 mL) was added substituted benzaldehyde(1 mmol). After dissolution, 50% NaOH (0.5 mL) was added. After confirming the completion of the reaction by thin layer chromatography, the sediment was filtered, washed with ethanol and dried to obtain chalcone

With the complex challenges of chemical substances, we look forward to future research findings about 2879-20-1,belong benzodioxans compound

Reference£º
Article; Yang, Yu-Shun; Yang, Bing; Zou, Yan; Li, Guigen; Zhu, Hai-Liang; Bioorganic and Medicinal Chemistry; vol. 24; 13; (2016); p. 3052 – 3061;,
Benzodioxan
1,4-Benzodioxane | C8H8O2 – PubChem