Day: September 23, 2020

2,3-Dihydrobenzo[b][1,4]dioxine-6-carbaldehyde oxime, cas is 31127-39-6, it is a common heterocyclic compound, the benzodioxans compound, its synthesis route is as follows.

To a solution of 500mg (2. 13MMOL) 5-BROMOMETHYL-THIOPHENE-2-CARBOXYLIC acid methyl ester and 381mg (2.13mmol) 2,3-dihydro-benzo [1, 4] dioxine-6- carbaldehyde oxime in 2ML dichloromethane were added 2. 0ml 2.2M aqueous sodium hydroxide solution and 902mg (2.55mmol) tertrabutylammonium hydrogen sulfate while vigorously stirring. After 10 minutes another 2. 0ML 2.2M aqueous sodium hydroxide solution and 902mg (2. 55MMOL) tertrabutylammonium hydrogen sulfate were added. This procedure was repeated one more time. After 20 minutes 8ml saturated aqueous bicarbonate solution was added. The aqueous phase was extracted three times with ethyl acetate and the combined organic phases were washed with brine and dried over NA2SO4. The solvent was evaporated and the residue was subjected to silica gel chromatography (hexane/ethyl acetate 4: 1, then 3: 1) to yield 214mg (0. 64MMOL) 5- (2, 3-Dihydro-benzo [1, 4] dioxin-6- ylmethyleneaminooxymethyl) -thiophene-2-carboxylic acid methyl ester; exact MW [M+H] calc’d: 334.07 ; MW found [M+H]: 334.2, 31127-39-6

As the rapid development of chemical substances, we look forward to future research findings about 31127-39-6

Reference£º
Patent; F. HOFFMANN-LA ROCHE AG; WO2004/87693; (2004); A1;,
Benzodioxan
1,4-Benzodioxane | C8H8O2 – PubChem

1-(2,3-Dihydrobenzo[b][1,4]dioxin-6-yl)ethanone, cas is 2879-20-1, it is a common heterocyclic compound, the benzodioxans compound, its synthesis route is as follows.

General procedure: A series of sixteen novel 1, 4-benzodioxane-based thiosemicarbazones(3a-p) was synthesized by reacting appropriatethiosemicarbazide (1a-p) (5 mmol) and 1, 4-benzodioxan-6-ylmethyl ketone (2) (5 mmol) in methanol (15 mL) using glacialacetic acid (1e2 drops) as catalyst. Reflux at 80 C for 6 h wascarried out and the product formation and the reaction completion were examined by thin layer chromatography. Upon completion,the reaction mixturewas allowed to cool at r.t and the solid productwas collected by suction filtration followed by washing with hotmethanol and then dried in vacuum. Finally, the target thiosemicarbazonesderivatives were recrystallized from chloroformmethanolmixture (1:1) in good to excellent yields. The X-raymeasurements were read by mounting a 3m single crystal on agreased MiTe Gen loop and was inspected through thediffractometer (Bruker D8 Venture APEX diffractometer) at 296 (2)K by means of graphite-monochromated MoeK a radiation(l 0.71073 A); diffractometer was complimented with an areadetector (Photon 100 CCD) along with a cooler (Oxford Cryostream).APEX-II software was used to collect Data [41] and SAINTwas operated for integration [42] The SADABS (multi-scanapproach) was used for correction in absorption [43]. and intrinsicphasing (SHELXT)was employed to the solve the structure [44]. Fullleast squares refinement of all detected reflections were used todetermine the final cell constants and assign positions of all atomsother than H to the consequential difference maps via refinementagainst F2. Whereas H atoms were assigned location and addedagainst F2 and were refined by riding model. SHELXL-97 wasimplemented to refine anisotropically [45]. The CCDC (CSD depositionnumbers 1874544) of the structure has been deposited. Thedetailed characterization of compounds 3a e 3p are given insupporting informations., 2879-20-1

As the rapid development of chemical substances, we look forward to future research findings about 2879-20-1

Reference£º
Article; Shehzad, Muhammad Tariq; Khan, Ajmal; Islam, Muhammad; Hameed, Abdul; Khiat, Mohammed; Halim, Sobia Ahsan; Anwar, Muhammad U.; Shah, Syed Raza; Hussain, Javid; Csuk, Rene; Khan, Samra; Al-Harrasi, Ahmed; Shafiq, Zahid; Journal of Molecular Structure; vol. 1209; (2020);,
Benzodioxan
1,4-Benzodioxane | C8H8O2 – PubChem

2,3-Dihydrobenzo[b][1,4]dioxine-6-carbaldehyde oxime, cas is 31127-39-6, it is a common heterocyclic compound, the benzodioxans compound, its synthesis route is as follows.

General procedure: To a solution of 2,3-dihydrobenzo[b][1,4]dioxine-6-carbaldehyde oximes 10 (2.69 g, 15.0 mmol) in THF (70 mL) at room temperature under nitrogen atmosphere, N-chlorosuccinimide (2.40 g, 18.0 mmol) and pyridine (120 muL, 1.50 mmol) were added. After being stirred for 40 min at 60 C, the mixture was cooled to rt and solutions of propargyl alcohol (700 muL, 12.0 mmol) in THF (2 mL) and triethylamine (2.50 mL, 18.0 mmol) in THF (4 mL) were added dropwise successively. After the mixture being stirred at 50 C for 2 h. Saturated NaHCO3 solution was added and the mixture was extracted with ethyl acetate (50 mL ¡Á 3). The organic layers were dried over anhydrous MgSO4 and concentrated. The residue was purified by flash column chromatography (hexane:EtOAc =2:1) to give the isoxazole alcohol 11 (when R2= 2,3-dihydrobenzo[b][1,4]dioxin-6-yl, 1.87 g, 67%). To a solution of thus prepared alcohol 11 (1.16 g, 5.00mmol) in dichloromethane (15 mL) at room temperature, pyridinium chlorochromate (2.16 g, 10.0 mmol) and 4 A molecular sieve (4.00 g) were added. After being stirred for 4 h, the mixture was concentrated and the residue was purified by flash column chromatography (hexane:EtOAc =3:1) to give the building block 3 (when R2= 2,3-dihydrobenzo[b][1,4]dioxin-6-yl, 740 mg, 65%). 1H NMR (500 MHz, CDCl3) delta 9.95 (s, 1H), 7.31 (s, 1H), 7.27 (d, J = 8.0 Hz, 1H), 7.13 (s, 1H), 6.90 (d, J = 8.0 Hz,1H), 4.22-4.27 (m, 4H). Other isoxazole aldehyde derivatives were synthesizedanalogously and identified with the 1H NMR spectroscopy., 31127-39-6

As the rapid development of chemical substances, we look forward to future research findings about 31127-39-6

Reference£º
Article; Oh, Yoo Na; Kwak, Jumyung; Koh, Hun Yeong; Jung, Sun Ho; Bulletin of the Korean Chemical Society; vol. 33; 12; (2012); p. 4227 – 4230;,
Benzodioxan
1,4-Benzodioxane | C8H8O2 – PubChem

A common heterocyclic compound, the benzodioxans compound, name is 1-(2,3-Dihydrobenzo[b][1,4]dioxin-6-yl)ethanone,cas is 2879-20-1, mainly used in chemical industry, its synthesis route is as follows.

General procedure: In a typical reaction, acetophenone (0.4 mmol) and I2 (0.4 mmol)was stirred in DMSO (1 mL) at 60C for 6 h. After the mixture was cooled to room temperature and subsequently, 2-methylindol(0.2 mmol), sesamol (0.2 mmol) were added to the reaction solutionalong with PTSA (0.04 mmol, 20 mol %). The mixture was then stirred at 80C for 3 h. At the end of the reaction,water (10 mL)was added and then extracted with EtOAc (310 mL). The acquired organic phase was combined and dried with anhydrous Na2SO4.The volatile components were removed under reduced pressure.The product was obtained by isolation with preparative TLC (elutingsolution: petroleum ether/dichloromethane1/2 (v/v)). Tests for substrate scope and the reaction of using other nucleophiles were all performed according to an analogous procedure. Whena 10 mmol scale reaction was conducted, the product was isolated by silica column chromatography., 2879-20-1

As the rapid development of chemical substances, we look forward to future research findings about 2879-20-1

Reference£º
Article; Cheng, Cheng; Liu, Changhui; Gu, Yanlong; Tetrahedron; vol. 71; 42; (2015); p. 8009 – 8017;,
Benzodioxan
1,4-Benzodioxane | C8H8O2 – PubChem

A common heterocyclic compound, the benzodioxans compound, name is 2,3-Dihydrobenzo[b][1,4]dioxine-2-carboxylic acid,cas is 3663-80-7, mainly used in chemical industry, its synthesis route is as follows.

Method I Ba (1 mmol) and 2,3-dihydrobenzo[b][1,4]dioxin-6-carboxylic acid (or 2,3-dihydrobenzo[b][1,4]dioxin-2-carboxylic acid) (1 mmol) together with EDCI (1.5 mmol) and HOBt (0.05 mmol) in CH2Cl2 (20 mL) were refluxed at room temperature for 10 h. While the reaction completed, the solution was washed with water for three times (30 mL each time). The remaining water layer was extracted by EtOAc for three times (30 mL each time). The organic layers (CH2Cl2 and EtOAc) were combined and then evaporated. The separated solid was crystallized from mixture of DMF and ethanol (9:1) to obtain the corresponding compound as translucent solid. 4.5.29 (3-(4-Bromophenyl)-5-(2-fluorophenyl)-4,5-dihydro-1H-pyrazol-1-yl)(2,3-dihydrobenzo[b][1,4]dioxin-2-yl)methanone (D14) White crystal, mp: 199-201 ¡ãC. 1H NMR (CDCl3, 300 MHz) delta: 3.21-3.27 (m, 1H), 3.82-3.88 (m, 1H), 4.45-4.66 (m, 2H), 5.61-5.66 (m, 1H), 5.80-5.84 (m, 1H), 6.86-6.88 (m, 3H), 7.02-7.23 (m, 4H), 7.47 (m, 3H), 7.74-7.77 (d, J = 7.5 Hz, 2H). MS (ESI): 481.05 (C24H19BrFN2O3, [M+H]+). Anal. Calcd for C24H18BrFN2O3: C, 59.89; H, 3.77; Br, 16.60; F, 3.95; N, 5.82; O, 9.97. Found: C, 59.72; H, 3.75; N, 5.83., 3663-80-7

As the rapid development of chemical substances, we look forward to future research findings about 3663-80-7

Reference£º
Article; Yang, Yu-Shun; Li, Qing-Shan; Sun, Shuai; Zhang, Yan-Bin; Wang, Xiao-Liang; Zhang, Fei; Tang, Jian-Feng; Zhu, Hai-Liang; Bioorganic and Medicinal Chemistry; vol. 20; 20; (2012); p. 6048 – 6058;,
Benzodioxan
1,4-Benzodioxane | C8H8O2 – PubChem

A common heterocyclic compound, the benzodioxans compound, name is 1-(2,3-Dihydrobenzo[b][1,4]dioxin-6-yl)ethanone,cas is 2879-20-1, mainly used in chemical industry, its synthesis route is as follows.

General procedure: 3.3. Reaction procedure for the synthesis of 5a The reaction was conducted in a 10 mL of V-type ask equippedwith triangle magnetic stirring. In a typical reaction, 1a(0.20 mmol) was mixed with 2a (0.20 mmol) and 4a (0.20 mmol)and BF3Et2O (50 mol %) in nitromethane (1.0 mL). The mixturewas then stirred at 80 Cforve hours. After reaction, 5a wasobtained by isolation with preparative TLC (eluting solution: pe-troleum ether/ethyl acetate5/1 (v/v)) in 77% (0.15 mmol, 51.1 mg)yield.

2879-20-1, As the rapid development of chemical substances, we look forward to future research findings about 2879-20-1

Reference£º
Article; Wang, Man; Liu, Changhui; Gu, Yanlong; Tetrahedron; vol. 72; 43; (2016); p. 6854 – 6865;,
Benzodioxan
1,4-Benzodioxane | C8H8O2 – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.2879-20-1,1-(2,3-Dihydrobenzo[b][1,4]dioxin-6-yl)ethanone,as a common compound, the synthetic route is as follows.

General procedure: A series of sixteen novel 1, 4-benzodioxane-based thiosemicarbazones(3a-p) was synthesized by reacting appropriatethiosemicarbazide (1a-p) (5 mmol) and 1, 4-benzodioxan-6-ylmethyl ketone (2) (5 mmol) in methanol (15 mL) using glacialacetic acid (1e2 drops) as catalyst. Reflux at 80 C for 6 h wascarried out and the product formation and the reaction completion were examined by thin layer chromatography. Upon completion,the reaction mixturewas allowed to cool at r.t and the solid productwas collected by suction filtration followed by washing with hotmethanol and then dried in vacuum. Finally, the target thiosemicarbazonesderivatives were recrystallized from chloroformmethanolmixture (1:1) in good to excellent yields. The X-raymeasurements were read by mounting a 3m single crystal on agreased MiTe Gen loop and was inspected through thediffractometer (Bruker D8 Venture APEX diffractometer) at 296 (2)K by means of graphite-monochromated MoeK a radiation(l 0.71073 A); diffractometer was complimented with an areadetector (Photon 100 CCD) along with a cooler (Oxford Cryostream).APEX-II software was used to collect Data [41] and SAINTwas operated for integration [42] The SADABS (multi-scanapproach) was used for correction in absorption [43]. and intrinsicphasing (SHELXT)was employed to the solve the structure [44]. Fullleast squares refinement of all detected reflections were used todetermine the final cell constants and assign positions of all atomsother than H to the consequential difference maps via refinementagainst F2. Whereas H atoms were assigned location and addedagainst F2 and were refined by riding model. SHELXL-97 wasimplemented to refine anisotropically [45]. The CCDC (CSD depositionnumbers 1874544) of the structure has been deposited. Thedetailed characterization of compounds 3a e 3p are given insupporting informations., 2879-20-1

2879-20-1 1-(2,3-Dihydrobenzo[b][1,4]dioxin-6-yl)ethanone 76143, abenzodioxans compound, is more and more widely used in various fields.

Reference£º
Article; Shehzad, Muhammad Tariq; Khan, Ajmal; Islam, Muhammad; Hameed, Abdul; Khiat, Mohammed; Halim, Sobia Ahsan; Anwar, Muhammad U.; Shah, Syed Raza; Hussain, Javid; Csuk, Rene; Khan, Samra; Al-Harrasi, Ahmed; Shafiq, Zahid; Journal of Molecular Structure; vol. 1209; (2020);,
Benzodioxan
1,4-Benzodioxane | C8H8O2 – PubChem

274910-19-9, (2,3-Dihydrobenzo[b][1,4]dioxin-5-yl)methanol is a benzodioxans compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated,274910-19-9

N5-Cyclobutyl-N3-methyl-2-oxo-1, 2-d ihydropyrid ine-3,5-d icarboxamide (50 mg, 0.201mmol), (2,3-dihydrobenzo[b][1,4]dioxin-5-yl)methanol (50.0 mg, 0.301 mmol) and 2-(tributylphosphoranylidene)acetonitrile (0.166 mL, 0.632 mmol) were combined in toluene (1.5 mL)and the reaction mixture heated in a 5 mL microwave vial on a Biotage Initiator microwave at 120C for 30 mm. The reaction mixture was poured onto water (20 mL), and extracted with ethylacetate (3 x 10 mL). The combined organic portions were evaporated in vacuo to yield the crude product as a brown oil. The product was loaded in dichloromethane onto a 25 g SNAP silica cartridge and purified via Biotage 5P4 flash chromatography, eluting from 50 – 100 % ethyl acetate/cyclohexane. The relevant fractions were combined and evaporated in vacuo – yielding 76mg of product. The sample was dissolved in MeOH/DMSO (1 mL, 1:1) and purified by MDAP (Formic). The solvent was evaporated in vacuoto give the required product – N5-cyclobutyl-1-((2,3- dihyd robenzo[b] [1,4]d ioxin-5-yl)methyl)-N3-methyl-2-oxo-1, 2-d ihydropyrid ine-3,5-dicarboxamide(40 mg, 0.096 mmol, 47.7 % yield).LCMS (2 mm Formic): Rt = 0.95 mi [MH] = 398.1.

274910-19-9 (2,3-Dihydrobenzo[b][1,4]dioxin-5-yl)methanol 2776182, abenzodioxans compound, is more and more widely used in various fields.

Reference£º
Patent; GLAXOSMITHKLINE INTELLECTUAL PROPERTY (NO.2) LIMITED; ATKINSON, Stephen John; AYLOTT, Helen Elizabeth; COOPER, Anthony William James; DEMONT, Emmanuel Hubert; HARRISON, Lee Andrew; HAYHOW, Thomas George Christopher; LINDON, Matthew J; PRESTON, Alexander G; SEAL, Jonathan Thomas; WALL, Ian David; WATSON, Robert J; WOOLVEN, James Michael; (308 pag.)WO2017/37116; (2017); A1;,
Benzodioxan
1,4-Benzodioxane | C8H8O2 – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.3663-80-7,2,3-Dihydrobenzo[b][1,4]dioxine-2-carboxylic acid,as a common compound, the synthetic route is as follows.,3663-80-7

2-iodophenol as raw materials, synthesis of racemic doxazosin, the reaction line as follows:1. Synthesis of Compound c: The same procedure as in Example 1, c.2. Synthesis of compound f (i.e., doxazosin racemate)Compounds c were weighed into eggplant flasks,Plus tetrahydrofuran dissolved,The mixture was stirred for 5-10 minutes at room temperature until compound c was completely dissolved.N, N’-carbonyldiimidazole (1.1 equiv) was weighed and dissolved in tetrahydrofuran,Was slowly added dropwise to the above solution,The mixture was stirred at room temperature for 1 hour,The solution A was obtained.Another take a pickle-shaped bottle,The compound g (2-piperazinyl-4-amino-6,7-dimethoxyquinazoline) (1.0 equiv)Followed by stirring for 10 minutes with tetrahydrofuran. Solution A was slowly added dropwise to solution B at 0 ¡ã C, and the reaction was allowed to proceed to room temperature for 4 hours after completion of dropwise addition. The solid was filtered off. The solid was dissolved in acetone and refluxed for 6 hours. Upon cooling to room temperature, the solid was filtered off and washed with acetone and dried to give a white solid as Compound f (doxazosin racemate). Yield 80percent

3663-80-7 2,3-Dihydrobenzo[b][1,4]dioxine-2-carboxylic acid 2735450, abenzodioxans compound, is more and more widely used in various fields.

Reference£º
Patent; Guangzhou Institute Of Biomedicine And Health Chinese Academy Of Sciences; Cai, Qian; Huang, Yusha; (17 pag.)CN105985328; (2016); A;,
Benzodioxan
1,4-Benzodioxane | C8H8O2 – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.2879-20-1,1-(2,3-Dihydrobenzo[b][1,4]dioxin-6-yl)ethanone,as a common compound, the synthetic route is as follows.

General procedure: Finely powdered CuO (0.8 g, 10.0 mmol) and I2 (2.53 g, 10.0 mmol) were added to a solution of aryl methyl ketone 9a (1.2 g, 10.0 mmol) in anhydrous MeOH (20 mL). The mixture was refluxed for 1-2.5 h. After disappearance of aryl methyl ketone 9a (monitored by TLC), the mixture was filtered and the solvent was removed under reduced pressure. The residue was poured into 10% Na2S2O3 solution (50 mL), the mixture was extracted with EtOAc (3 ¡Á 50 mL), and the organic layer was dried (Na2SO4). Removal of the solvent and purification of the residue by column chromatography gave the desired product 1a in 96% yield.

2879-20-1, The synthetic route of 2879-20-1 has been constantly updated, and we look forward to future research findings.

Reference£º
Article; Zhu, Yan-Ping; Cai, Qun; Gao, Qing-He; Jia, Feng-Cheng; Liu, Mei-Cai; Gao, Meng; Wu, An-Xin; Tetrahedron; vol. 69; 31; (2013); p. 6392 – 6398;,
Benzodioxan
1,4-Benzodioxane | C8H8O2 – PubChem